Hi I'm Skyler, and I'm into crafts, sewing, baking, and other domestic intrigue!

Ruffled Baby Blanket and Matching Tag Blanket

This will soon be your new go to gift for new moms. My mom taught me how to make this ruffle blanket and it is amazing! It feels wonderful and looks really expensive. Every time Ada and I go out with one people comment and want to know where we bought it! As for the tag blanket, I just kind of made up the “pattern” for it, they are super quick and easy, plus Ada loves hers!

Watch the video below, or keep reading for the full tutorial. This is my first video, so please be kind šŸ™‚

Materials:Ā 
1 yard cute printed fabric
1 yard minky (if you’re going to make 2 sets, get 1 1/4 yard)
1-1 1/4 yard silky fabric for ruffle
2 coordinating spools of ribbon (or 36″ of each)

Cut out your fabrics:
Printed fabric: a 30″x30″ square and a piece about 10″x15″ for the tag blanket.
Minky: a 30″x30″ square and a piece about 10″x15″ for the tag blanket.
Ruffle fabric: For a larger ruffle, cut 4 strips 8″ wide. For a smaller ruffle, cut 4 strips 6″ wide.
Ribbon: Cut eight 4″ long strips from each ribbon (you should end with 16 total).

The Ruffle Blanket
Step 1: The ruffle is the hardest part of the entire project, but it’s really not that bad, just push through and you’ll be super impressed with yourself at the end! So you just should have cut your strips. I like to make the larger ruffle for girly blankets and the smaller ruffle for boy blankets.

Stack your strips like so with all the folded ends at the bottom and the loose ends at the top. Take the top piece and pull it off the the side like in the picture. You’re going to pull this top piece and fold it around the bottom so that it comes back to meet with the loose ends, but it is now on the bottom.

Take your loose ends, two at a time and sew them together. You should end with four pairs of sewn ends, and together they’ve formed a large ring. Trim off the excess up to 1/4 away from the seam.

Step 2: With the wrong side facing up, fold the bottom edge up to the top edge and pin together along the length of the fabric ring.

Using a basting stitch (a 5 stitch length on your machine) go around the entire pinned edge 1/4″ away from the edge. When you come close to your starting point, stop about 1/4″ away and do not back stitch.

Step 3: Tie your top strings together and pull on your bottom strings to gather the fabric into a pretty ruffle. We want the ruffle to fit perfectly around the edge of out 30″x30″ square, so check it periodically by folding it into fourths and seeing how close you are to 30″ long. Once you’ve gotten your ruffle the right length, tie your bottom two strings together.

Now you can take your cotton fabric right side up and pin the ruffle to it. Make sure that your raw edges of the ruffle match up with the edge of the fabric so that ruffle is going in toward the center of the blanket. Now sew the ruffle in place.
Step 4: Once you’ve sewn the ruffle in place, lay it out on a table and push all of the ruffles toward the middle of the blanket. Then take your square of minky and place it right side down on top of your cotton and ruffle. Pin everything together.

Step 5: Now it’s time to sew it together. We’re going to use a 1/4″ seam and leave a 4″-5″ opening for turning. This part can be tricky because the ruffle has a tendency to want to get caught in your seam.

To prevent this, you’re going to stick your hand in between the layers to flatten out the ruffle and keep it in place. Do this around the entire blanket, fix the ruffle, then sew a little, fix the ruffle again, etc.
The corners can be especially tricky, be sure you push the ruffle out of the way for one edge, then when you get to the corner, adjust the ruffle by smushing up against the seam you just sewed.

Step 6: Turn your blanket right side out. Poke out your corners with something pokey and check your ruffle for any weird catches. If you need to use your seam ripper to free the catch and sew it up again. Once everything looks great hand stitch up the opening.

Topstitch with a 3/8″ seam from the ruffle all the way around the blanket.
You’re done, now snuggle up!

The Tag Blanket
Step 1: Cut eight 4″ ribbon strips from two different ribbons so you have 16 total. Fold them in half to make little loops and sew the loose ends together with aĀ  1/4″ seam.

Step 2: Place the 10″x15″ cotton piece right side up and place your ribbon loops evenly around the edges. I place five on the long sides and three on the short sides. Pin the ribbon loops around the edge so that the sewn edge matches up with the edge of the fabric and the loop end it going in toward the center.

Step 3: Lay the minky right side down on top of the pinned ribbon piece.
Pin it in place starting with the corners.

Step 4: Sew around the sandwich with a 1/4″-3/8″ seam Make sure that the minky on bottom, this will prevent your minky from waving and stretching. Leave a 3″-4″ opening for turning.

Turn your blanket right side out and poke out the corners with something pointy. Hand stitch up the opening.

Step 5: Top stitch around the blanket 1/4″ away from the edges to give it a nice finished look and to anchor those ribbons in place!

Enjoy your ruffle baby blanket and matching tag blanket!

21 Comments

  1. The video was awesome!!! Thank you sooo much for doing it!!!

  2. Thank you for a great tutorial! I made the tag blanket. I’ve never sewn with Minky so after ripping out my first attempt, I learned to really pin and switched to my walking foot. Your tutorial made the process much easier than I expected. Thanks again.

  3. I was surprised how tricky minky can be to sew. I used a remnant cut into squares, and some leftover satin cut into squares, to make taggies. Oh My Word it was pretty much impossible to keep the two together neatly!

  4. Hi,
    Thanks for the wonderful tutorials,I’ve made two bubble blankets for friends following your instructions and they’ve both been highly praised!! I just wanted to comment that for making the ruffle I think it’s a good idea to cutit on the bias. Generally for quilt edging if you sew on the bias it will age better. But also if you are using a fabric such as satin which will fray easily, the gathering causes a lot of issues. I did one on the straight and the second on the bias and the bias one was a lot easier to gather and attach!!!

    • I’m so glad the tutorials worked out for you! I totally agree that cutting the ruffle fabric on the bias is a great idea, it would definitely be much easier to work with! I’m cheap and lazy, so I haven’t been doing that for my ruffles, but I probably should! šŸ™‚ Thanks!

  5. Thank you thank you! Such a great tetorial keep up the good work!

  6. Just saw your adorable puff quitt as a Facebook posting, love it! Checked your ruffle instructions and have a suggestion for you. This is so easy for any gathers:
    Lay cotton crochet thread inside seam line.
    Tack end of thread at beginning of seam area.
    Zigzag wide over thread, being careful not to catch it.
    Crochet thread is strong and will not break easily when you pull it to make the gathers. The zigzag makes the casing.
    When the gathers are sewn in place, the crochet thread can be pulled out to reduce bulk.

    I will never again use the original method taught to me 50 yrs. ago @4H.

    • Rachael, Thanks for the instructions. I’ve heard of doing the ruffle like that before, but, I’ve never actually tried it for some reason! I should really try your method, because the basting stitch method is pretty unpleasant to work with! Thanks!

    • Thank you Skyler rfor this tutorial and thank you Rachel for the tip for making the ruffle. I cut the satin on the bias and used this method (with embroidery floss I had on hand) and I was thrilled at how easy it was. The last time I worked with satin I was really frustrated and this tip was why I tried again. What a difference!! Looking forward to making more of these.

  7. 恄恤悂ćØ恩恓恋違恆č‡Ŗåˆ†ć®å§æć‚’ä½•åŗ¦ć‚‚鏔恧ē¢ŗčŖć—态恊恋恗恄ćØ恓悍恌ćŖ恄恋ē¶æåÆ†ć«ćƒć‚§ćƒƒć‚Æć‚’ć—ć¦ć„ćŸ

  8. This was great, thank you! How do you figure the length of fabric you need for your ruffle when working with other size blankets? Is is something like a ratio of 3:1 of the circumference of your blanket?

    • I generally try to stick around a ratio of 2:1

  9. what do I need to make a baby blanket bubble one

    • Iā€™d be happy to help you with some of the details if you want to send me an email: skyler[at]awaitingada.com

  10. why don’t you measure across the width of the fabric so that there are fewer seams in the ruffle?

  11. Thank you for your videos! They are very helpful! I made my first bubble blanket and got so many compliments! For the ruffle fabric, the 2:1 ratio, does it mean that if the circumference of the blanket is 80 inches, make the ruffle 160 inches long?

    • Theresa, the 2:1 ratio is just my rule of thumb, but you can do it with more or less. So, if it were me, I’d probably use about 160 inches of the ruffle fabric to gather together down to the 80 inches. Hope that makes sense.

  12. how do you base the measurement of your ruffle length according to your blanket size?? do you double the the length..add a certain amount of inches to make the gathers on the ruffle

    • Honestly, I don’t really have a set system in place, I kind of wing it each time. I know that many people follow the double it method. If you want it more ruffly add more inches.

  13. Do you have a tutorial on just how to make the ruffle. I tried to watch the one featured here, but the 21min seemed to be too much to load for YouTube. I tried all day to get it to play and only got about 6min into it and wouldn’t load anymore. Just need a visual reference for the ruffle. Please help if you can give any suggestions please.
    Thanks,
    Janine

    • A king size mattress is 78″x80″ and the recommended quilt size is 106″x94, which correlates to a 27×24 bubble rectangle for a total of 648 puffs.

Trackbacks/Pingbacks

  1. New and Improved Tutorial: Bubble Quilt Method #2 | Awaiting Ada - [...] backing for your blanket, it needs to be 28″x28″. Cut out and make your ruffle. See my tutorial…
  2. Bubble Quilt – Puff Blanket – Biscuit Quilt | Awaiting Ada - [...] to go around your blanket. I didn’t show the steps to making a ruffle, but you can look here…
Me on Pinterest RSS Feed Me on Twitter